Wineracks

[hotwine]

I had recalled making my diamond bins with dimensions slightly off from an even 3' X 5', so I measured them. Sure enough, they are actually 37" wide by 60" tall. The idea was to provide inside dimensions of 12" X 12" for the full-sized bins, while keeping the overall size suitable for wrestling down the stairs and through the inner and outer doors of the cellar. I used 1/2" plywood for construction, but wouldn't again. 1" X 12" boards would work much better - but the overall dimensions would need to be increased to allow for the thicker material. And the units would be much heavier. (In retrospect, I think bins 13" square would be better than 12" - 12" makes for too tight a fit for the bottles.)

Jackie - We're in the wrong forum for this topic. Could you move us down one on the list, to the forum on Racking? Thanks.
Gil